It is very important to take some maintenance measures to prolong machine life. Here are some steps to maintain fiber laser cutter.
1. Every week check the oil pump and oil circuit to ensure that the oil pump has sufficient oil and smooth oil circuit; the rack part and the Z-axis guide rail are manually oiled (the rack is recommended to apply grease); every month the cutting residue is cleaned to ensure the machine is clean.
2. Every week clean the dust in the power distribution cabinet and check whether the switches and lines are in good condition.
3. Forbid to step on, press and bend the power cord and laser fiber optic cable.
4. Ensure that the laser head is clean overall. The optical lens must be cleaned to avoid secondary pollution. When replacing the lens, seal the window to prevent dust from entering the laser head.
5. It is recommended to use distilled water, deionized water or purified water. It is forbidden to use tap water and mineral water to prevent corrosion or scaling of equipment. Change water regularly (replace once every 4~5 weeks) and filter element (replace once every 9~12 months).
Post time: Feb-15-2019