Taimakawa gas da iska na Ruijie Laser
Fiber Laser Yanke yana buƙatar Nitrogen da Oxygen don taimakawa aikin yanke.Ana amfani da O2 yayin yanke MS, kuma a duk faɗin duniya, mutane suna amfani da N2 akan SS don samun kyakkyawan gamawa.O2 akan SS yana kawo tasirin carbonising akan saman da aka yanke kuma yana buƙatar aiki bayan aiki.
Kuma babban abin da ake amfani da shi a cikin amfani da O2 a cikin tsarin yanke shi ne cewa O2 yana oxidises karfe.A zahiri yana haifar da tsarin yankewa.Yin amfani da O2 yana ba da damar Laser don shiga zurfi cikin ƙarfe.Don haka za a iya ƙara kaurin yanke ta amfani da O2.Idan har N2, yana kwantar da ƙarfe yayin aikin yankan.Don haka, don kyakkyawan gamawa, yana da kyau a yi amfani da N2 a cikin tsarin yanke don HAZ ya ragu sosai.Waɗannan su ne ƙa'idodi guda biyu da za a yi la'akari da su wajen amfani da gas ɗin taimako.
Abu na biyu shine game da tsabtar gas ɗin taimako.Akwai wasu ƙa'idodi masu tsabta don taimakawa gas ɗin don amfani dashi a cikin tsarin yankan Laser.Matsayin tsarki na gama gari na taimakon gas shine 99.98%.Gabaɗaya yana da kyau a yi amfani da mafi girman matakin tsarki da ake samu.Duk wani ɓarna a cikin ingancin yankan yana da tasiri kai tsaye akan ƙare yanke.Matsin iskar gas kuma yana ƙayyade tsarin yanke.
Na uku shine hawan iska.A lokacin aikin yankan, an kafa rami tsakanin ainihin bangaren da takardar ƙarfe na iyaye.Wannan rami a haƙiƙanin narkakkar yanayin ƙarfe ne.Laser yana dumama karfen har sai ya narke.Karfe da aka narka idan aka rabu/ cire shi ne lokacin da yanke ya faru.Kuma don tsarin rabuwa, iska dole ne.Don haka matsa lamba na iska yana da matukar mahimmancin rawar da zai taka wajen ingancin gamawa.
Lokacin aikawa: Fabrairu-13-2019